Our Cleaning Service

Tile Cleaning
Rock Cleaning
Brick Cleaning
Tile Cleaning

​The best tile cleaning service

Tile cleaning.

See our cleaning process below or choose another tab for other cleaning info

Rock Cleaning

​Waterline calcium adheres to rocks as well

We can clean most rock surfaces. We will do a test spot to make sure that your surfaces can be cleaned up beautifully. Not only waterline calcium removal, we clean waterfalls and raised walls as well. 

See our cleaning process below or choose another tab for other cleaning info

Brick Cleaning

​Yes, bricks can be cleaned

Brick coping and raised walls can be cleaned as well with a few caveats. Bricks are a softer material than most and can show slight wear after the cleaning service. We suggest only cleaning bricks when necessary and less often than tile cleaning. Additionally, some calcium could be migrating from behind bricks such as raised walls with landscaping behind it. This type of calcium could return in a short time as there is additional calcium just behind the surface waiting to migrate back out again.

See our cleaning process below or choose another tab for other cleaning info

​Our Cleaning Process

Drain

When we show up we will introduce ourselves, turn pool equipment and auto fills off or to service mode, and begin draining your swimming pool. We use our own gas powered pump to quickly drain your pool 6-8 inches so we can safely and effectively clean your tile and other surfaces specified.

Surface Cleaning

We will determine the best blasting media for cleaning. Depending on surface type and durability, this may include glass bead blasting or mineral blasting. Most surfaces can be cleaned with glass bead blasting, but some surfaces such as glass tile, black tile, painted tiles, and occasionally high gloss blue tiles will require a gentler mineral blast.

Clean Up

We clean down all surfaces in your yard and use our own equipment to vacuum the material off the bottom of your pool. If you have chosen to seal your tile, we will apply tile sealer at this time. Fill water is turned on when we leave, or when tile sealer applied, wait 24 hours to start filling your pool. When water is back to normal fill level, pool equipment can be turned back on.